Stainless Steel Insert - Burkert 2030 Instructions De Service

Stainless Steel insert (only for units without membrane and casing)
If you have ordered and received a unit without
membrane and casing, a stainless steel insert (ID No.
648 864) will have been included with it.
Use of an EPDM/FKM membrane:
When assembling a unit with an elastomer membrane
(EPD/FKM), lay the stainless steel insert into the groove
in the pressure component.
Use of a PTFE membrane:
When using a PTFE membrane, the insert is not
required.
10 - 2030/2031K big