Sony SU-LW1 Mode D'emploi page 11

Step 4: Install the Plate Unit on the wall
1
Align the Plate Unit.
Plate Unit
2
Hole used for temporarily
attaching the Plate Unit
2
1
Temporarily secure the Plate Unit to
the wall using a screw. Align the
Plate Unit to make it level with the
floor.
WARNING
• The screw used in this procedure is not supplied
with the unit.
• Select a screw suitable for the material and the
structure of the wall.
Secure the Plate Unit to the wall
using four or more M6 or equivalent
screws (not supplied).
1Tighten the screws firmly so that the Plate Unit can
support the weight of the display.
2Tighten the screw used in 1.
WARNING
The wall must be strong enough to support at least
four times the weight of the display that you installing
(9 (US)). Make sure the wall has sufficient strength.
Reinforce the wall if necessary.
11
(US)