Operating The Appliance; Switching On The Appliance; Switching Off And Disconnecting The Appliance; Setting The Temperature - Gaggenau Rt282 Notice D'utilisation

Masquer les pouces Voir aussi pour RT282:
Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

Bottle holder
When you open and close the door:
The bottle holder prevents the bottles from
overturning.
Ice cube tray
You can make ice cubes:
1
Fill the ice cube tray 3/4 full with water and place in
the freezer compartment.
Note: If the ice cube tray is stuck to the freezer
compartment, loosen with a blunt implement only
(e.g. spoon handle).
2
To loosen the ice cubes, twist the ice cube tray
slightly or hold briefly under flowing water.
1
2

Operating the appliance

1
S witching on the appliance
O p e r a t i n g t h e a p p l i a n c e
Press the # button.
1
The appliance begins to cool.
2
Set the required temperature.
"Setting the temperature" on page 31
~
Operating tips
After the appliance has been switched on, it may
take several hours until the set temperature has
been reached. Do not put in any food until the
selected temperature has been reached.
The sides of the housing are partly heated slightly.
This prevents condensation in the area of the door
seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Press the # button.
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
Press the # button.
1
The appliance no longer cools.
2
Pull out the mains plug or switch off the fuse.
3
Clean the appliance.
4
Leave the appliance open.

Setting the temperature

Recommended temperature
Refrigerator compartment:
Refrigerator compartment
Keep pressing the button –/+ until the display
indicates the required temperature.
Cool-fresh compartment
The temperature in the cool-fresh compartment is kept
at around 0 °C.
Note: If frost forms on the food items in the cool-fresh
compartment, set a higher temperature. ~
what to do?" on page 40
Operating the appliance
+4 °C
"Faults –
en
31
Table des Matières
loading

Table des Matières