General Information; Maintenance & Care - LD Systems LD WILDTHANG 200 Manuel D'utilisation

GENERAL INFORMATION:

GENERAL INSTRUCTIONS FOR USE:
• Always connect suitable speakers.
• Make certain that all input and output connections are made correctly.
• Make certain that the amplifier is set to the correct mains voltage for your country.
• Connect the signal source, for example, a mixer, to the inputs of the amplifier.
• Set the input gain (volume) on the amplifier to minimum.
• First power up the signal source (mixer, etc.) and then the amplifier.
• Set the input gain to the desired volume.
MAINTENANCE & CARE
1. Clean the unit with a slightly damp cloth. Avoid getting moisture inside the amplifier. Do not use alcohol or
other solvents or cleaning agents, because these may damage the unit.
2. Clean ventilation slits periodically using a vacuum cleaner. This improves the cooling efficiency of the fans and
guards against overheating.
Note: Please note that improper connections lead to malfunctions. Before use, make certain that all connections
have been made correctly.
7