Publicité
Les langues disponibles
Les langues disponibles
en Cleaning and servicing
Setting
Tones
Boiling point automatism ¡ 0 m - 50 m
Software update
Resetting to factory set-
tings
Software licence texts
1
Factory setting
20 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
20.1 Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
can damage the appliance.
▶
Do not use harsh or abrasive
cleaning products.
120
Selection
Volume
¡ Off
1
¡ 1: quiet
¡ 2: medium
¡ 3: loud
Key tones
1
¡ on
¡ off
1
¡ 51 m - 300 m
¡ 301 m - 600 m
¡ 601 m - 900 m
¡ 901 m - 1200 m
¡ 1201 m - 1500 m
¡ 1501 m - 1800 m
¡ > 1800 m
¡ Software version cur-
rently installed
¡ New available soft-
ware version
-
Software licence texts
▶
▶
▶
▶
▶
Description
¡ Set the volume of the
tones.
¡ Set the touch key
tones.
Set your altitude above
sea level to adjust the
boiling point.
¡ Show software version
currently installed.
¡ Update software ver-
sion.
Reset edited settings
back to the factory set-
tings.
Call up software licence
texts.
Do not use cleaning products with
a high alcohol content.
Do not use corrosive or aggressive
cleaning products or ones contain-
ing chlorine or calcium carbonate.
Do not use oven cleaner.
Do not use limescale remover on
the touch display or control panel
as they may leave permanent
staining.
Wash sponge cloths thoroughly
before use.
Publicité
