Changing The Basic Set- Tings; Cleaning And Servicing; Dishwasher-Safe Compon- Ents - Siemens TQ505DF Série Manuel D'utilisation

en Cleaning and servicing
Setting
Water hardness
Key tones
Factory settings
1
Factory setting (may vary according to model)
10.2 Changing the basic set-
tings
Press
1.
Use or
2.
sired basic setting and press
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
Use or
3.
sired selection and press
a The setting is now saved.
Use to go back.
4.
Press
5.

Cleaning and servicing

11 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
11.1 Dishwasher-safe com-
ponents
Find out here which components can
be put in the dishwasher.
60
Selection
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Water-softening system
Key tones on
Key tones off
Full reset?
Continue: OK
Cancel: ←
⁠ .
to select the de-
to make the de-
⁠ .
to exit the menu.
1
1
ATTENTION!
Some components are sensitive to
heat and may be damaged if they are
cleaned in a dishwasher.
Follow the operating instructions of
▶
the dishwasher.
⁠ .
Only put dishwasher-safe compon-
▶
ents in the dishwasher.
Only use programmes that do not
▶
heat the water above 60 °C.
Dishwasher-safe
¡ Drip plate
¡ Drip grate
¡ Coffee dregs container
¡ Mechanical fill level indic-
ator
¡ Milk system with adapter
¡ Ground coffee compart-
ment with hinged lid
¡ Milk container with lid
Not dishwasher-safe
¡ Drip tray
¡ Water tank
¡ Water tank lid
¡ Aroma lid
¡ Brewing unit
¡ Beverage dispenser cover
Description
Set the appliance to the
local water hardness.
→ "Setting the water
hardness", Page 52
Switch the button tones
on or off.
Restore settings to the
factory settings.
Note: All individual set-
tings will be deleted and
reset to the factory set-
tings.