Tare Function/Measuring In A Container; Measuring Liquids; Hold Function (Hold) - SilverCrest SDL 300 C2 Mode D'emploi

♦ Remove the material from the spoon
add the next portion of material to be weighed.
The weight of the new material is now added to
the previous weight on the display
total weight is shown.
♦ You can repeat this procedure until you have
reached 3000 g in total weight. If 3000 g is
exceeded, the display
NOTE
► You cannot use the TARE function while you
are adding weights!

TARE function/measuring in a container

♦ If you want to weigh food in another container,
place the container in the spoon
♦ Then press the ON/TARE button
display to zero.
♦ When you add the food to the container, only
the weight of the food itself will be displayed.
If you take the container with the food off the
spoon
♦ Now press the ON/TARE button
return to the normal weighing mode.

Measuring liquids

The scale in the spoon
liquids (15–45 ml or 1–3 tablespoons).
However, due to optical displacement, differences
of up to 15% can occur.

Hold function (HOLD)

If you press the HOLD button
being displayed, the weight display will be retained
even if you remove the contents from the spoon
If you then press the HOLD button
will deactivate the hold function and the current
weight will be displayed again.
SDL 300 C2
, a negative value will be displayed.
shows "
can be used for measuring
while a weight is
GB │ IE
and
and the
".
first.
to reset the
again to
again, you
│
19
.
■