First Use; Switching On The Bathroom Scales / Measuring Weight - SilverCrest SPWS 180 C1 Manuel D'utilisation

First use

Switching on the bathroom scales / measuring weight

Due to the step on power function, the bathroom scales are switched on automatically when you
step on the tread (2) and they start to measure your weight immediately.
A solid surface is required to measure weight correctly. Thus always place the
bathroom scales on a solid, horizontal floor covering and never on carpet.
This can distort the measurement result.
To obtain comparable measurement results, you should always weigh yourself
if possible at the same time of day (preferably in the morning). Always weigh
yourself if possible under the same conditions: on an empty stomach, after
having gone to the toilet and naked.
The unit of weight is set to "kg". To change the language, press the language selection button (4)
when the scales are switched on. The selected language is then indicated on the LCD display (1).
The following languages are supported by the bathroom scales:
Display
DE
FR
IT
NL
TR
Set the desired volume for the voice output via the volume control (5) In order to deactivate the
voice output, turn the volume control (5) completely towards "-" until it snaps into place.
Stand on the tread (2) of the bathroom scales so that your weight is evenly distributed. Remain as
still as possible during the weighing process as the measurement result may be distorted otherwise.
The measurement result is indicated on the LCD display (1) during the weighing process. The
measurement is complete when the display flashes twice. The determined weight is also indicated
via the voice output.
In order to perform another measurement, you have to step off the tread (2) of the bathroom scales.
Then wait until the LCD display (1) resets itself or the voice output confirms the operational
readiness before stepping on the tread (2) again.
Language
German
French
Italian
Dutch
Turkish
SilverCrest SPWS 180 C1
English - 21