Saey Scope Guide D'installation Et D'utilisation page 54

•
Opening of the filler door
Before the fireplace can be filled via the side filler door, the right side wall must be opened, as described
above. The curved side and stylus of the control handle are first hooked into the opening of the filler
door lock, and pulled upwards.
•
Operation of the primary air inlet
A primary air inlet is situated on the rear of the appliance to facilitate regulation of the air supply and the
post-combustion air via the openings above the glass. These can be regulated by means of the knob of
the air slider on the right, behind the cover plate. Another marking is visible on the upper end of the
rear.
The stop to the right is position "0", and indicates no air supply. The stop to the left is position "l", and
indicates maximum air supply. The central position therefore indicates a 50% air supply. After a while,
you will instinctively know how to use the appliance most effectively by setting the corresponding
positions of the primary air slider and the combustion air inlet.
54