Technical Data; Noise/Vibration Information - Bosch GSB 19-2 REA Professional Notice Originale

8 | English
(14) Button for depth stop adjustment
(15) Dust collector for drill bits
(16) Handle (insulated gripping surface)
A)
(17) Depth stop
A)
(18) Screwdriver bit
A)
(19) Universal bit holder
A)
(20) Drill chuck key
A)
(21) Keyed chuck
B)
(22) Hex key
(23) Guide groove for dust extraction system
(24) Filter element (Microfilter system)
(25) Release button for dust box
(26) Dust box flap
(27) Depth stop (dust extraction system)
(28) Rubber ring for dust collector
(29) Release button for dust collector
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)

Technical Data

Impact drill
Article number
Rated power input
Max. power output
No-load speed
– First gear
– Second gear
Rated speed
– First gear
– Second gear
Impact rate at no-load speed
Rated torque
– First gear
– Second gear
Speed preselection
Clockwise/anti-clockwise
Keyed chuck
Keyless chuck
Fully automatic spindle lock
(Auto-Lock)
Spindle collar diameter
Max. drilling diameter (first/second gear)
– Concrete
– Masonry
1 609 92A 55R | (17.07.2019)
Impact drill
– Steel
– Wood
Chuck capacity
Suction capacity
Dust box capacity (for level drilling)
– Drill holes, 6 x 30 mm
– Drill holes, 8 x 30 mm
– Drill holes, 10 x 30 mm
Weight according to
EPTA-Procedure 01:2014
– with dust extraction at-
A) – without dust extraction at-
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
GSB 19-2 REA
Sound pressure level 95 dB(A); sound power level
106 dB(A). Uncertainty K=5 dB.
3 601 A7C 5..
Wear hearing protection!
W 900
Vibration total values a
W 455
determined according to EN 62841-2-1.
Drilling into metal: a
-1
min 0–1000
Impact drilling into concrete: a
-1
min 0–3000
Screwdriving: a
Thread cutting: a
-1 The vibration level and noise emission value given in these
min 770
instructions have been measured in accordance with a
-1
min 1990
standardised measuring procedure and may be used to com-
-1
min 51,000
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
Nm 5.7
ent the main applications of the power tool. However, if the
Nm 2.2
power tool is used for other applications, with different ap-
●
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
●
increase the vibration and noise emissions over the total
–
working period.
●
To estimate vibration and noise emissions accurately, the
●
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
mm 43
over the total working period.
Implement additional safety measures to protect the oper-
mm 18/13
ator from the effects of vibration, such as servicing the
mm 20/15
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
l/min
tachment
tachment
(triax vector sum) and uncertainty K
h
2
= 3.0 m/s , K = 1.5 m/s
h
= 15 m/s
h
2
<2.5 m/s , K = 1.5 m/s
h
2
<2.5 m/s , K = 1.5 m/s
h
GSB 19-2 REA
mm 13/8
mm 40/25
mm 1.5–13
460
pc. 130
pc. 75
pc. 45
kg 3.2
kg 2.6
/ II
2
.
2 2
, K = 2.0 m/s .
2
.
2
.
Bosch Power Tools