Gaggia PLATINUM SWING SUP 034NR Mode D'emploi page 28

26
MAINTENANCE
10
descaling cycle
please wait
The machine begins to dispense
the descaling solution through the
hot water spout. The dispensing
occurs at predetermined intervals,
in order to allow the solution to be
more effective.
Insert the tank with fresh
drinking water.
13
rinse cycle
ok to start
Rinse the machine's circuits by
pressing the button.
16
Turn the knob until it is in the rest
position ( ). Check the quantity of
water in the tank and install the
"Aqua Prima" water fi lter again, if
desired.
11
passage
[ 6/15]
The intervals are displayed in such
a way as to check the state of
progress of the process.
14
rinse cycle
please wait
The machine performs the rinse
cycle. During the rinse cycle, the
machine may require the water
tank to be fi lled.
When descaling is complete, return to the main menu
to dispense to dispense beverages.
When the solution is fi nished the
following message appears on
the display:
12
fill the
water tank
Remove the water tank, rinse
with fresh drinking water to
eliminate traces of descaling
solution, then refi ll with fresh
drinking water.
15
rinse cycle
completed
When the rinse cycle is fi nished the
following screen appears. Then the
display shows the maintenance
screen.