Operation - IKEA FRYSA Consignes De Sécurité

Masquer les pouces Voir aussi pour FRYSA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

Operation

Control panel
A++
Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
Function button
5
ON/OFF switch
6
Display
A
B
A) Timer function
B) Drinks Chill function
C) Fast Freezing function
D) Child Lock function
E) Alarm indicator
F) Temperature indicator
Switching on
Connect the mains plug to the power
socket.
Press the ON/OFF button if the display is
off.
If DEMO appears on the display, the
appliance is in demonstration mode. Refer
to "Troubleshooting" section.
6
C
D E
F
1
4
3
5
2
The temperature indicators show the set
default temperature.
To set a different temperature refer to
"Temperature regulation".
Switching off
Press the ON/OFF button for 5 seconds.
The display turns off.
To disconnect the appliance from the
power, disconnect the mains plug from the
power socket.
Temperature regulation
The set temperature of the freezer may be
adjusted by pressing the temperature
button.
Default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The temperature of the freezer
compartment may vary between more or
less -15°C and -24°C.
The set temperature will be
reached within 24 hours. After a
power failure the set
temperature remains stored.
Functions menu
Each time Function is pressed, the following
functions can be activated:
9

Publicité

Table des Matières
loading

Table des Matières