Operation - IKEA VALGRUNDAD Mode D'emploi

ENGLISH

Operation

Control panel
1
1
2
Refrigerator temperature button
3
Refrigerator temperature indicators
Switching on
Warning! Refer to "Electrical connection"
section of the Safety chapter.
• Connect the mains plug to the power socket.
The display on the control panel turns on.
The temperature indicators show the set
default temperatures for the refrigerator
and the freezer compartments respectively.
• To change temperature, refer to the section
for temperature regulation.
set the appliance at a colder temperature and
run it without loading any food until it auto
stops at the set temperature. Usually it takes
2 or 3 hours, then set a desired temperature and
put food in the appliance.
• T
1
the
• To switch the appliance on, press and hold
1
the
To disconnect the appliance from the power
supply, disconnect the mains plug from the
power socket.
2 3
seconds. The
seconds
4
4
Freezer temperature button
5
Freezer temperature indicators
Temperature regulation for refrigerator
compartment
2
• Press the Refrigerator temperature
button to toggle the
46˚F (8˚C) 39˚F (4˚C)
• One ( ) on indicates 46°F (8°C) is set.
• Two ( ) on indicate 39°F (4°C) is set.
• Three (
set.
Temperature regulation for freezer
compartment
4
• Press the Freezer temperature button
5
to toggle the
temperatures.
3˚F (-16˚C) -2˚F (-19˚C)
• One ( ) on indicates 3°F (-16°C) is set.
• Two ( ) on indicate -2°F (-19°C) is set.
• Three (
is set.
5
3
refrigerator
36˚F (2˚C)
) on indicate 36°F (2°C) is
freezer temperature
-11˚F (-24˚C)
) on indicate -11°F (-24°C)
12