Technical Information - IKEA FRYSA Consignes De Sécurité

ENGLISH
Problem
Temperature cannot be set.
The temperature in the ap-
pliance is too low/too high.
If your appliance still is not
working properly after making
the above checks, contact the
After Sales Service. You can find
the list at the end of this manual.

Technical information

Technical data
Product dimensions
Height
Width
Depth
Net volume
Freezer
Possible cause
The Fast Freezing function
is switched on.
The temperature regulator
is not set correctly.
The food products' tem-
perature is too high.
The door has been
opened often.
The Fast Freezing function
is switched on.
There is no cold air circula-
tion in the appliance.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective door
1772 mm
540 mm
549 mm
208 Litre
Switch off Fast Freezing man-
ually, or wait until the function
resets automatically to set the
temperature. Refer to "Fast
Freezing function".
Set a higher/lower tempera-
ture.
Let the food products temper-
ature decrease to room tem-
perature before storage.
Open the door only if necessa-
ry.
Refer to "Fast Freezing func-
tion".
Make sure that there is cold
air circulation in the appliance.
"Installation".
gaskets. Contact the After Sales Service.
16
Solution