IKEA FRYSA Consignes De Sécurité page 15

ENGLISH
Problem
Audible or visual alarm is
on.
Audible or visual alarm is
on.
The compressor operates
continually.
The compressor does not
start immediately after
pressing the Fast Freezing,
or after changing the tem-
perature.
Water flows on the floor.
Possible cause
The cabinet has been re-
cently switched on or the
temperature is still too
high.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
The door is left open.
The temperature in the ap-
pliance is too high.
Temperature is set incor-
rectly.
Many food products were
put in at the same time.
The room temperature is
too high.
Food products placed in
the appliance were too
warm.
The door is not closed cor-
rectly.
The Fast Freezing function
is switched on.
This is normal, no error has
occurred.
The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Solution
Refer to "Door Open Alarm".
Refer to "High Temperature
Alarm".
Close the door.
Contact a qualified electrician
or contact the nearest After
Sales Service.
Refer to "Operation" chapter.
Wait some hours and then
check the temperature again.
Refer to climate class chart on
the rating plate.
Allow food products to cool to
room temperature before stor-
ing.
Refer to "Closing the door".
Refer to "Fast Freezing func-
tion".
The compressor starts after a
period of time.
Attach the melting water outlet
to the evaporative tray.
15