Kopp Free-control Mode D'emploi page 33

GB
Switching mode
Description
Application
Connectivity
DIP switch
Setting
Pinning diagram
(page 30)
1
2
Switching
operation
LED signalling
actuation point on operating rocker
Connection of universal radio transmitter to a customary switch (on-
off/two-way/universal switch).
Individual control of up to two radio receiver groups.
Up to two on-off/two-way/universal switches can be simultaneously
connected to a universal radio transmitter.
Select mode A. To activate the mode A, remove battery for at least
30 seconds and then reinsert the battery. Set both of the DIP switch
positions to ON.
1
2
3
4
2
Switch ON 2 on-off/two-way/universal
switch: radio signal „ON" is transmitted
1
Switch OFF 1 on-off/two-way/universal
switch: radio signal „OFF" is transmitted
With every signal emission, the universal radio
transmitter's LED flashes shortly.
Connect 1st switch
(on-off/two-way/universal switch)
to the input channel 1 / 2.
Connect 2nd switch
(On-off/two-way/universal switch)
to the input channel 3 / 4.
Teach both switch positions (ON/
OFF) on the receiver.
33