Kopp Free-control Mode D'emploi page 24

GB
Bedienungsanleitung
D
Operating instructions
GB
Bedieningshandleiding
NL
Mode d'emploi
F
Bruksanvisning
S
Introduction
You have decided in favour of a high-quality
product that has been manufactured with
the utmost care. Only proper installation and
commissioning can ensure long, reliable and
fault-free operation. This manual contains
important information on commissioning
and handling. Please read carefully!
Keep the manual in a safe place for future
reference. This appliance meets the require-
ments of the applicable European and nation-
al regulations and is approved for use in the
EU and EFTA States.
24
You can find the declaration of conformity,
02-23
further information, applicat on examples,
product overview and instruction manual at:
www.kopp.eu
24-45
Liability or any further claims, in particular
46-67
for compensation for injury to persons or
damage to property caused by the device due
to missing or faulty functions are excluded.
68-89
Changes due to technical progress, changes
in standards,
90-111
processes or design changes are expressly
reserved.
Please note the rules of electrical engineering
and compliance with the technical data!
Please ensure and check that the device is
switched off before beginning workDo not
connect any devices which require supervised
operation.
Do not make any changes to the devices.
The radio transmission takes place on a non-
exclusive, available frequency channel at
868.3 MHz.
Therefore, faults cannot be completely ruled
out.
However, the appropriate design ensures that
maximum transmission security is achieved.
Not suitable for safety applications, e.g.
EMERGENCY STOP, EMERGENCY CALL.
modified manufacturing