Télécharger Imprimer la page

Verderflex VP2-PH Manuel D'installation Et D'entretien page 7

Publicité

I
COLLEGAMENTO IDRAULICO
F BRANCHEMENT HYDRAULIQUE
F Filtre d'aspiration
Lier le tuyau d'aspiration (PVC Cristal moelleux) au filtre de fonde en dotation. Iinsérer dans le tuyau premier l'embout, puis le
tuyau arrêté et finalement le cône, ce dernier dans le tuyau, au point d'au bout. Visser l'embout et insérer le filtre d'aspiration sur
le fond du récipient qui contient le produit chimique à doser. Dans le cas d'utilisation de la sonde de niveau, il faut la lier au filtre
à travers l'étrier en dotation.
E Filtro de aspiración
Conectar el tubo de aspiración (PVC transparente) al filtro suministrado teniendo cura de insertar en el tubo primero la tuerca,
luego el firme tubo y por fin el cono, este último dentro del tubo, hasta el final. Atornillar la tuerca e insertar el filtro de aspiración
sobre el fondo del contenedor que contiene el producto químico que dosificar. En el caso de empleo de la sonda de nivel
(optional), ella va unido al filtro a través del estribo en dotación.
Rev 2.0
I Filtro di fondo
Collegare il tubo di aspirazione in PVC (trasparente) al filtro di fondo avendo
cura di inserire nel tubo prima la ghiera, poi il ferma tubo ed infine il cono,
quest'ultimo dentro il tubo, fino in fondo. Avvitare la ghiera ed inserire il filtro di
aspirazione sul fondo del contenitore che contiene il prodotto chimico da
dosare. Nel caso di utilizzo della sonda di livello (optional), essa va collegata
al filtro per mezzo della staffa in dotazione.
UK Foot filter
Connect the suction tube (PVC soft cristal) to the foot filter that is supplied,
having care to insert in the hose, first the nut then the hose guard and finally
the hose connection , this last one inside the hose until the end. Screw the nut
and put the foot filter into the liquid suction lift tank. The level probe (optional)
has to be connected to the filter through the support that is supplied.
I Aspirazione: Collegare il tubo di aspirazione (b) al raccordo di aspirazione (a).
Serrare la ghiera (c).
Mandata: Collegare il tubo di mandata (e) al raccordo di mandata (d).
Serrare la ghiera (f).
UK Suction: Connect the suction hose (b) to the suction nipple (a). Tighten nut (c).
Delivery: Connect the delivery hose (e) to the delivery nipple (d). Tighten nut (f).
F Aspiration:
Lier le tuyau d'aspiration (b) au raccord d'aspiration (a).
Fermer l'embout (c).
Refoulement : Lier le tuyau de refoulement (e) au raccord de refoulement (d).
Fermer l'embout (f).
E Aspiración: Conectar el tubo (b) al record de aspiración (d). Cerrar la tuerca (c).
Impulsión: Conectar el tubo (e) al record de impulsión (d). Cerrar la tuerca (f).
Cod. 00.008.643
UK HYDRAULIC CONNECTION
E CONEXIÓN HIDRÁULICA
7

Publicité

loading

Ce manuel est également adapté pour:

Vp2-rxVp2-oxVp1