Saving Processed Effects (Save); Saving An Effect - Sony DPS-V77 Mode D'emploi

Saving Processed Effects (SAVE)

Saving an Effect

Effects created by changing the parameter values with the
edit function can be stored in one of the two USER memory
banks for later use. Each USER bank has room for 99
effects, so you can store up to 198 different effects
1
Press SAVE.
SAVE : Fat Reverb
Fat Reverb
U1 8
BANK# MEM#
2
Press FUNCTION A [BANK#] and use the
operation dial to select the user memory
bank (USER 1 or USER 2) where you want
to save the effect.
SAVE : Fat Reverb
Fat Reverb
U1 8
BANK# MEM#
A B
3
Press FUNCTION B [MEM#] and use the
operation dial or number buttons to select
the memory number (1-99) where you
want to save the effect.
SAVE : Fat Reverb
Fat Reverb
U2 8
BANK# MEM#
A B
22
EN
Memory number display
Bank BANK/COMPARE
indicators
MAR / 22 / 95 00:00
Name EXEC
MAR / 22 / 95 00:00
Name EXEC
C D E F
MAR / 22 / 95 00:00
Name EXEC
C D E F
The following procedure shows you how to store an effect in
one of the USER memory banks.
Multi-display
FUNCTION A-F
4
Press FUNCTION C [Name].
The Save: name screen appears in the display.
SAVE : Fat Reverb
Fat Reverb
CLR DEL
Use the
Operation dial
(shuttle ring)
Number buttons
FUNCTION A
[</CLR]
FUNCTION B [DEL]
FUNCTION C [INS]
FUNCTION D [>]
FUNCTION E [AB/ab]
FUNCTION F [EXEC]
Use EXIT to go back to the previous screen if necessary.
5
Press FUNCTION F [EXEC] to execute the
save operation.
The PLAY screen appears in the display.
SAVE Shuttle ring
Number
Operation dial
buttons
INS > AB/ab
to
select icons and characters.
select characters. The display
changes as shown below each time
you press each button:
1
1 / A / B / C / 1
2
2 / D / E / F / 2
3
3 / G / H / I / 3
4
4 / J / K / L / 4
5
5 / M / N / O / 5
6
6 / P / Q / R / 6
7
7 / S / T / U / 7
8
8 / V / W / X / 8
9
9 / Y / Z / [ / 9
move the cursor backward. When
the cursor is all the way to the left,
[CLR] (clear) appears instead of [<]
and lets you erase the entire name.
delete the character at the cursor
position.
insert a space at the cursor position.
move the cursor forward.
switch between capital or small letters.
execute the save operation.
EXEC