Morphing - Sony DPS-V77 Mode D'emploi

Choosing an Effect

Morphing

When the structure is set to [MORPH] (see page 8 for details on the
system structure, see page 19 to change the structure), the effector
creates a seamless change between effects when you switch to
other memory numbers whose structures are also set to [MORPH].
Note
The effector does not respond to any commands (including MIDI)
during the morphing process. It will not respond until the preset
morphing time has elapsed (see below).
Setting the morphing time and curve
1
Press SYSTEM.
2
Press FUNCTION E to select "Morph."
System :
M
Set Memry
UP
A B
16
EN
Pedal M I D I Morph
C D E F
3
Press FUNCTION A [Time] and use the
operation dial to set the morphing time.
The morphing time is the length of time from the
beginning to the end of the morphing process.
The effector will not respond to any commands
(including MIDI) during this period.
System : Morphing Condition
2.0
Time Curve
A B C
4
Press FUNCTION B [Curve] to select the
morphing curve.
System : Morphing Condition
2.0
Time Curve
A B C
Provides a gradual transition to the next sound.
Brings the next sound in quickly while the first
sound fades out.
Note
You cannot set the morphing time and curve independently for
each effect.
D E F
D E F