Setting The Real Time Control (Rtc) - Sony DPS-V77 Mode D'emploi

Setting the Real Time Control (RTC)

By using MIDI controls, such as dampers and modulation wheels,
you can control various characteristics of an effect in real time. Since
control conditions vary for each type of effect, control assignments
are made separately for each effect block parameter in the RTC block.
The effector is provided with 6 MIDI RTC channels, each carrying
independent control source and destination (parameter) information.
1
Choose an effect from the memory banks.
PLAY : CEQ – Hall / CEQ – Hall
Fat Reverb
1. 0 0. 64 0. 8
Size RotHI Size
2
Press PAGE/EDIT twice.
3
Press FUNCTION A to choose "RTC."
EDIT SELECT :
RTC
Active P
A B C
4
Use the FUNCTION buttons (A-F) to choose
an RTC channel (1-6).
Real Time Controller Select :
RTC 1 RTC 2 RTC 3 RTC 4 RTC 5 RTC 6
A B C
5
Use page 1 to specify the parameter you
want to control.
EDIT : RTC 1 (Parameter)
Hall OnOff Off
Block PARAM Min
[Block]: selects the block to be controlled, select OFF if
you don't want to use that RTC channel.
[PARAM]: specifies the parameter to be controlled
from the selected block.
[Min]: specifies the minimal value of the parameter's
adjustable range.
[Max]: specifies the maximal value of the parameter's
adjustable range.
0. 70 –6. 0 –6. 0
RotHI FxA–1 FxB–1
PAGE : 1 2
D E F
D E F
PAGE : 1 2 3 4 5
On
Max
6
Press PAGE/EDIT and use page 2 to specify
kind of controller you will use.
EDIT : RTC 1 (Source)
CO 0 0
Sourc Min Max
[Sourc]: selects the control source.
C0-C31 : To use a MIDI control change number.
C64-C120 : To use a MIDI control change number.
Note N : To use a note number
Note V : To use note velocity (Note Off is
obtained by setting note velocity to 0.)
BENDR : To use a pitch bender
CH-PR : To use channel pressure
M.CLK : To use the MIDI clock (tempo display)
as a control source. Settings can be made
within the range of 30 to 250.
PEDL 1 : To use pedal 1 (Be sure to select "Pedal"
on the System: Pedal screen, page 25).
PEDL 2 : To use pedal 2 (Be sure to select "Pedal"
on the System: Pedal screen, page 25).
[Min]: specify the minimal value of the control source's
adjustable range.
[Max]: specify the maximal value of the control source's
adjustable range.
Press EXIT a few times to return to the PLAY screen.
EXAMPLE
Suppose you want to set RTC 1 to use the MIDI control change
number 8 (balance control) to change the Hall Reverb effect
balance from 75:25 to 25:75 :
EDIT: RTC 1 (Parameter) screen (step 5) :
Set [Block] to "HALL" and set [PARAM] to "E. BAL" (effect balance).
Then set [Min] to "75:25" and [Max] to "25:75."
EDIT: RTC 1 (Source) screen (step 6):
Set [Source] to "C8" (control 8), [Min] to "0" and [Max] to "127."
Source
Control Change #8
127
Adjustable Set range
range
0
Now you can adjust the effect balance from 75:25 to 25:75 when
you adjust control change number 8 (balance control) from 0 to 127.
PAGE : 1 2 3 4 5
Parameter
Effect Balance
EFF
25:75
Adjustable
range
75:25
DRY
21
EN