Outputting Without Effects (Bypass/Mute) - Sony DPS-V77 Mode D'emploi

Outputting Without Effects (BYPASS/MUTE)

The effector comes with two different bypass modes, Bypass and
Mute. Therefore, you can use the BYPASS button to cut output of
the original sound or to output the original sound without effects
depending on which bypass mode you select.
Once you set the BYPASS mode, just press BYPASS to activate
Bypass or Mute. Press again to cancel the bypass or mute .
BYPASS
Choosing the bypass mode
1
Press SYSTEM.
2
Press FUNCTION A to choose "Set Up."
System :
M
Set Memry Pedal
UP
A B C
3
Press FUNCTION C to choose "Bypass."
System : Setup
Input Gate Bypass
A B C
M I D I Morph
D E F
FX
DISP Clock Dry off
D E F
4
Use the operation dial to select BYPAS or
Mute.
System : Bypass Mode
BYPAS
Mode
select when
BYPAS you want to output the original signal
without adding any effects. Only the
original signal is output (see "Bypass
and Mute" on page 11).
Mute you want to completely cut the sound
output from the effector (including the
input signal). We especially recommend
using mute when connecting the effector
in a send-return loop with a mixer (as
shown on page 12).
Press EXIT a few times to return to the PLAY screen.
15
EN