Positioning The Refrigerator; Securing The Refrigerator - Dometic DMC4101 Manuel D'installation Et D'utilisation

Installation

5 .3 Positioning the Refrigerator

NOTICE: If the refrigerator is not leveled during
installation, the doors may not close or seal properly,
causing cooling, frost, or moisture problems. It is very
important for the refrigerator to be level in order to
function properly.
This section describes proper positioning for the
refrigerator before installation.
e
q
(Side View)
2 Enclosure Dimensions
DMC4101 59.9 in. (1523.0 mm)
q
DMC4081 53.9 in. (1369.0 mm)
Enclosure Height
24.0 in. (610.0 mm) Enclosure Width
w
24.0 in. (610.0 mm) Enclosure Depth
e
1. Position the refrigerator away from heat sources such
as stoves, radiators, and direct sunlight.
2. Place the refrigerator in a stable, flat location.
3. Level the refrigerator by turning the leveling legs
clockwise (to raise the refrigerator) or counter-
clockwise (to lower the refrigerator).
4. Leave the refrigerator in an upright position for at least
four hours before turning it on.
6
e
w
(Top View)

5 .4 Securing the Refrigerator

This section describes how to secure the refrigerator in
the enclosure.
I If the door swing will be reversed, complete the
reversal procedure before securing the refrigerator
inside the enclosure. Refer to "Door Swing
Reversal" on page 8 for details.
I Before securing the refrigerator, ensure the
refrigerator is positioned correctly. Refer to
"Positioning the Refrigerator" on page 6 for
details.
3 Installing the Top Mounting Bracket
Top Mounting Bracket
q
1. Secure the top mounting bracket to the refrigerator
using the two M5 x 20 mounting screws provided.
2. Place the refrigerator completely into the enclosure.
q
4 Installing the Bottom Mounting Bracket
Bottom Mounting
q
Bracket
DMC Refrigeratorss
w
q
Mounting Screw
w
w
Mounting Screw
w
EN