Installing The Main Or Additional Monitor - Philips WelcomeEye Comfort Guide D'installation Rapide

b. Con guring the number of families:
Place switch 1 on the left to be in one-family mode and on the right to be in 2-family mode.
c. Intercom volume settings:
Turn the volume control with a Phillips head screwdriver to adjust the intercom volume.

3. Installing the main or additional monitor

1
4
7
1 - Position the wall bracket so that the screen of the monitor is approximately 1.60m above
the ground.
2 – Mark the location of the holes using the U bolt.
3 – Drill.
4 – Use pegs adapted to the bracket (those supplied are suitable for solid walls).
5 - Attach the wall bracket.
6 - Connect the 2 intercom panel wires and the 2 power supply wires in accordance with
the wiring diagram.
7 - Position the monitor on the wall bracket.
8 - Depending on the con guration selected, and when wiring is completed, the interface
may have to be con gured. For more information please refer to the complete
1m60
2
5
WelcomeEye Comfort / Compact / 08/17
3
DES 9900 VDP
Wi 2.4GHz 5 3 8 1 0 2
24V 550mA
+ -
1/3 2/4
CFI Extel
ZI de Fétan, 01600 Trévoux
FRANCE
DES 9900 VDP
5 3 8 1 0 2
6
GB6