Medion S49017 Mode D'emploi page 93

 Proceed in this way to align the shooting area for
the camera.
NOTE
In observation mode, the sensor LED does
not light up when a moving object is
recognised!
6.1.1. Automatically switching off test
mode
In order to avoid the camera being unintentionally
left in test mode, it is possible to set the camera to
automatically switch to observation mode after a
certain period of time.
 Move the TEST/NORMAL switch to the
NORMAL position.
 Press the POWER button to switch on the
camera.
 Press the MENU button and use the  or 
buttons to select standard mode and confirm with
OK.
 Use the  and  buttons
to select the SETTINGS menu and press OK.
 Use the  and  buttons to select TEST MODE
OFF and confirm with the OK button.
 Use the  and  buttons to select the desired
switchover time (OFF, 2 MIN, 5 MIN or 10
MIN).
 Press the MENU button to accept the settings.
92 of 230