Configuration 4 - Storage Tank Without Serpentine - Palazzetti KP 20 Manuel D'installation, D'utilisation Et De Maintenance

8.4 Configuration 4 - Storage tank without serpentine

Storage tank probe
6
1
P1
Parts included in the boiler
Set configuration 4 when you intend to con-
nect the appliance to a storage tank without
serpentine.
The appliance turns on according to the temper-
ature read by the storage tank probe, and turns
off based on the boiler return temperature.
The antifreeze function can also be set in this
configuration.
004778640 - 10/02/2021
T
T
6
5
4
3
2
1
ITALIANO
P2
8.4.1 Storage tank without serpentine
electrical connection
In this case simply move the room temperature
probe on the appliance and extend it to place it
in the probe seat, found on the storage tank (Fig.
38).
Storage tank probe
6
1
It is important to check that the ap-
pliance is set in Configuration 4 (see
"8.5.1 Software setting" on page 91).
ENGLISH FRANÇAIS
P2
Fig. 37
Fig. 38
89