Chimney Flue - Palazzetti KP 20 Manuel D'installation, D'utilisation Et De Maintenance

B
On the first vertical tee, at the flue gas outlet of
the appliance, a pipe must be connected at the
bottom to drain any condensate that may form
in the chimney (Fig. 19).
004778640 - 10/02/2021

6.6 Chimney flue

The chimney for the evacuation of flue gases
must be made by qualified personnel in compli-
ance with standards UNI 10683- EN 1856-1-2- EN
1857-EN 1443- EN 13384-1-3- EN 12391-1 both in
terms of the dimensions and the materials used
in its construction.
The evacuation of flue gases via a traditional
chimney (Fig. 20) can be done as long as you are
B
sure of the state of maintenance of the chimney.
In the case of an old chimney, it is advisable to
renew it using ducting.
The flue gas exhaust must be on the roof.
B
Fig. 18
Fig. 19
1) Wind-proof cowl
2) Seal
3) Inspect
Make sure that the connection to the brickwork
chimney is properly sealed.
ITALIANO ENGLISH
1
2
FRANÇAIS
3
Fig. 20
79