Velleman CAMIP5N Notice D'emploi page 9

• Set the preferred colour for the On Screen Display (OSD): disabled (no OSD), black, yellow, red, white or
blue. The OSD shows the name of the camera in the top right corner of the camera display and a date and
time stamp at the bottom.
• When the Add timestamp on record checkbox is checked, date and time are shown on the recorded file.
Note: set the time via the For Administrator screen (see further).
• Set the audio buffer. The speaker output will be delayed for the indicated number of seconds.
• When the icon is shown the alarm record path (see User Settings below) is opened once an alarm-
triggered recording is finished. Click the icon to switch this function off. The icon changes into
• Press the snapshot button
the desired camera display first by left-clicking on it. A new window with the picture is opened. Press the
Save button and select the desired location to save the picture.
• Press the view button
• At the bottom of the left pane, each of the 9 possible cameras has 3 icons. Unavailable cameras are
dimmed.
= audio – talk – record
Click the icon to enable the camera's microphone
o
Click the icon to enable the camera's speaker/audio port; a PC microphone (not incl.) is required.
o
Click the icon to start recording the selected camera's images.
o
Notes:
• When an icon is clicked, it changes to the stop icon
• The recorded file name is cameraname_timestamp.avi
For example: Counter_20081211134442.avi
• The path where the movies will be stored can be set by the administrator in the For Administrator screen
(see further).
8.4 For Operator layout
• When entering an administrator password, the user can open the For Operator layout.
• In this layout, it is possible to pan/tilt the camera using the control panel:
Press on the arrows around the blue button to move in that direction.
Press and hold to move faster.
Press in the centre to start auto-scanning the whole area.
auto tilt (vertical movement)
auto pan (horizontal movement)
switch IR LEDs on
V. 02 – 22/05/2012
CAMIP5N
to take a snapshot of the camera display. In multiple screen layouts, select
to start viewing the camera images, press the stop button
. Click this icon to stop the underlying function.
stop auto tilt
stop auto pan
switch IR LEDs off
9
.
to stop viewing.
©Velleman nv