Technical Specifications - Velleman CAMIP5N Notice D'emploi

• The port of the IP camera is blocked by a firewall or anti-virus software. In this case, try using a different
port number.
• Port mapping failed. Either enable UPnP (via UPnP Settings) or edit the routers Virtual map list (refer to
the user manual of your router).
11.

Technical specifications

sensor
lens
minimum illumination
resolution
built-in pan/tilt
supported network protocols
wired connection
wireless connection
network connection
audio
video
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior notice.
V. 02 – 22/05/2012
left/right
up/down
standard
supports 3 methods
compression format
frame rate
resolution
CAMIP5N
¼" colour CMOS sensor
3.6mm / F2.4
0.5 lux (IR LEDs off)
640 x 480 pixels (300 000 pixels)
controllable through internet
300°
120°
TCP/IP, UDP, IMCP, SMTP, HTTP, FTP, DNS, DDNS, DHCP,
PPPoE, GPRS
Ethernet 10/100 Base-T and 8P8C (RJ45)
IEEE 802.11b/g/n
supports WEP, WPA & WPA2 encryption
fixed IP, DHCP, PPPoE
supports DHCP, installs the IP address automatically (plug-
and-play network)
built-in microphone
MJPEG
15 FPS (VGA), 30 FPS (QVGA)
640 x 480 (VGA), 320 x 240 (QVGA)
110 x 100 x 108mm
±333g
20 ©Velleman nv