Proline FP7WH Manuel D'utilisation page 112

Positioning
Install the appliance on a flat hard
floor.
Make sure that air circulation around
the appliance is not impeded by
carpets, rugs, etc.
Allow at least 2 cm of clearance at
each side of the appliance.
Make sure that the appliance does
not stand onto the power cord.
Installation location requirements
Before installing the appliance, the location characterised as follows shall be
selected:
• Rigid, dry, and level surface
• Avoid direct sunlight
• Su cient ventilation
• Room temperature is above 0°C.
• Keep far away from heat resources such as coal or gas burning appliances.
Levelling the appliance
Levelling the washing machine properly prevents
excessive noise and vibration.
Install the appliance on a solid and level floor
surface.
If the floor is uneven, turn the adjustable feet as
required.
• Never put cartons, wooden blocks or similar
materials under the feet.
FP7WH IB FR NL EN PT.indd 109
FR
NL
EN
PT
109
12/12/2023 10:29 AM