Rinse Aid - ETNA VWV549WIT Mode D'emploi

USE

Rinse aid

Rinse agent is added during the final rinse. Rinse agent prevents traces of water droplets being
left behind on the clean dishes. Moreover, it ensures that the dishes dry quicker, since the water
drains off more easily.
The dishwasher is designed for use with liquid rinse agent. The rinse agent reservoir is located on
the inside of the door, alongside the detergent compartment.
Note: refill the rinse agent reservoir when the rinse aid indicator lights up. The reservoir
has a capacity of approximately 100 ml. Do not overfill the rinse agent reservoir.
This will cause the rinse agent reservoir to overflow. Rinse agent spillages must be
cleaned up, otherwise they may lead to leakages as a result of extreme foaming.
1. Unscrew the cap from the rinse agent reservoir (to the left, toward the arrow with "open").
2. Pour the rinse agent into the reservoir, taking care not to overfill it. The reservoir has a
capacity of approximately 100 ml.
3. Replace the cap. Make sure that the cap is lined up with the "open" arrow and turn in the
direction of the "closed" arrow.
Setting the quantity of rinse agent
A fixed amount of rinse agent is added during the final rinse. As is the case with detergent, the
amount of rinse agent needed is dependent on the hardness of the water in your area. Too much
rinse agent can lead to streaks on the dishes.
EN 11