Operating Instructions; Loading The Bottom Stapler - Josef Kihlberg B561PN Mode D'emploi

KUDA PACKAGING
6
Fig. 4
Fig. 5
Fig. 6
SERVIS A NAHRADNÍ DÍLY
06.14
www.kuda-packaging.com
OPERATING INSTUCTIONS

6.1 LOADING THE BOTTOM STAPLER

– Always use Josef Kihlberg original staples
JK561-15, JK561-18 or JK561-22.
The correct type of staple is marked on the left side
of the magazine.
– Pull the pusher back and lift up the pusher into its
rear holder.
– Insert staple strips from the rear.
– Do not overload the magazine.
– Release the pusher.
+420 607 237 237
Josef Kihlberg B561PN
info@kuda-packaging.com
Do not release the pusher directly from
the rear when the magazine is empty,
carefully guide it forward.
servis@josef-kihlberg.eu
7