Textron Ransomes MATADOR 71 Mode D'emploi page 30

6 CONTROLS
6.3 THROTTLE CONTROL ____________________________________________
To change the cutting speed, use the hand lever (D).To
increase the engine turns, move the hand lever (D) down.
To decrease the engine turns, return the hand lever (D) to
the Low Idle position.
6.4 BRAKE RELEASE LEVER _________________________________________
To apply the landroll brake, move the hand lever (E) to
the top position. To release the landroll brake, move the
hand lever (E) to the lowest position.
en-30
D
E