Beurer WL 50 Mode D'emploi page 43

7.4 Light/night lamp
The device features a night lamp with three brightness levels.
• To switch on the night lamp, briefly tap the sensor surface (speaker surface on the top of the device).
• To set the light's brightness level, tap the sensor surface (speaker surface on the top of the
device) again.
• To switch the night lamp off again, press the sensor surface (speaker surface on the top of the
device) for longer (approx. 2 seconds).
7.5 Mood light
The wake up light can also be used as a mood light. The mood light comes in the following
colours:
White (3 brightness levels) -> Yellow -> Blue -> Green -> Red -> Mood light with change of
colour -> Off
1. To switch on the mood light on the wake up light, briefly tap the sensor surface (speaker sur-
face on the top of the device).
2. To switch between the different mood lights, tap the sensor surface (speaker surface on the
top of the device) again.
3. To switch the mood light off again, press the sensor surface (speaker surface on the top of the
device) for longer (approx. 2 seconds).
43