Beurer WL 50 Mode D'emploi page 39

7.2 "Alarm" wake-up function
Note
The device features two alarm memory spaces that can be configured individually.
To set the alarm on the device, proceed as follows:
1. Press and hold either the Alarm 1 or Alarm 2 button for two seconds, depending on which
alarm memory space you would like.
2. The alarm hour flashes on the display.
Use the or
3. The alarm minute flashes on the display.
Use the or
firm.
4. Use the or
confirm.
= Wake-up melody 1 (Melody with bird calls)
= Wake-up melody 2 (Chimes)
= Beep
= Radio (most recently set radio station)
= No tone
button to set the alarm hour. Use the
button to set the alarm minute. Use the
button to set the desired alarm tone. Use the
39
button to confirm.
OK
button to con-
OK
OK
button to