Publicité
Les langues disponibles
Les langues disponibles
EN
3-5. Mounting Instruction
3-5-1. Wall Mount ( For Marine )
Step 1. Use the screws to mount the Drip shield and the product on the wall.
Step 2. Please make sure the height from the ground to product at least 70 cm.
The bulkhead size requires at least 83 mm clearance each side of the inverter.
：
：
Fig. 11
Wall mount step 1
Fig. 12
Wall mount step 2
3-5-2. Ceiling Mount ( For Vehicle and Marine )
Use the screws to mount the product on the wall, and the product mounting requirement is as follow:
a. The mounting height from the ground to product requires at least 70 cm.
：
Fig. 13
Ceiling mount
27
Publicité
