Vito Agro VIR47 Mode D'emploi page 37

The clothing worn while using this machine must be
appropriate, tight and closed. Do not wear loose clothing or
jewelry. Keep hair, clothing, fingers and the rest of the body
away from moving parts.
Always wear security shoes with non-slip sole that fully
covers the foot while working. Never work barefoot or
wearing sandals.
In case of nausea, headaches, sight problems (eg.
reduced vision), hearing problems, dizziness and
reduced ability to concentrate, stop using the machine
immediately. These symptoms may be caused by high
exhaust gas concentration.
The combustion engine produces poisonous gases as soon
as it starts working. These gases contain toxic carbon
monoxide, a colourless, odourless gas, as well as other
harmful substances. The combustion engine may never be
turned on inside confined or poorly ventilated spaces.
While operating the machine, schedule some time to rest
and avoid using the machine for long periods of time.
Permanent vibration is very harmful.
Do not remove the wrapped product from the cutting
accessories and respective protections while the engine is
running or the cutting blade is rotating. Stop the engine
and wait for all the accessories to stop before removing the
material wrapped around the blade axis or cutting head
with nylon line and its protections.
A massive load of vibrations may damage nervous
and circulatory systems, especially to whom have
circulatory problems. Inform your doctor if any symptoms
arise caused by vibration. Among these symptoms, that
occur specially on fingers, hand and wrists, are also
included loss of sensation, pain, muscle weakness, skin
discoloration or tingling sensation.
The control and safety devices installed in the machine
cannot be removed or inhibited.
When carrying out any cleaning, adjusting, repairing or
maintaining work, wear gloves and place the machine in a
firm and steady surface.
Remove the spark plug cap as an unintentional spark
can cause burns or an electric shock. A contact of
the spark plug with the spark plug cap may cause an
involuntary start of the combustion engine.
Allow the appliance to cool down especially before
carrying out maintenance works in the transmission
area, combustion engine,
Temperatures of 80 ° C and above can be reached.
Frequently check the machine, especially before storage
(for example, before the winter period), regarding wear and
damages.
For safety reasons, replace worn or damaged parts
immediately so the unit is always in perfect working
conditions.
Cleaning:
The equipment must be well cleaned after use.
Clean the engine by hand (avoid introducing water into the
air filter and into the exhaust). Avoid wetting the controls
and other equipment / accessories that are difficult to dry
(water stimulates the appearance of rust);
Do not use aggressive cleaning products. These products
can damage plastics and metals, leading to an incorrect
operation of the machine.
In order to avoid the risk of fire, the area of the air openings,
the cooling fins and the exhaust must remain free of
flammable waste.
Maintenance:
Only maintenance works described in this instruction
manual may be performed; all other work must be done by
an official dealer.
Only use accessories, oils or lubricants authorizes by VITO.
Otherwise, injuries or damages may occur. In case of doubt,
you must contact your official dealer.
For safety reasons, the fuel conductive components (hoses,
tank, tank cover and connections) should be checked
regularly for damage and leaks. If necessary, they should
be replaced by an official dealer.
Keep warning and information stickers always clean and
legible.
Keep all nuts and screws tight so that the machine can
operate safely.
If any components or safety devices are removed while
maintenance works, they must be reassembled properly.
exhaust and muffler.