Publicité
Les langues disponibles
Les langues disponibles
Carry the brush cutter only when the engine is off. Before
moving it, stop the engine and wait for the cutting
accessories to stop completely.
Always transport the equipment when the engine is cold
and without fuel. This prevents petrol spillage during
transport.
Always fasten the machine when transporting it and install
the blade protection.
Make sure that the machine is used only by who is familiar
with the instruction manual.
Check fuel system tightness, particularly visible
parts such as tank, tank cap, flexible hose
connections, and manual carburetor fuel pump. In the
event of leakage or damage, do not start the combustion
engine and have the machine repaired by an official dealer.
Pay attention to the area where the device will be used and
check for obstacles (rocks, tree stumps, roots, trenches,
etc.), objects (coiled wires, metal parts) or loose stones. Not
being possible to remove these objects or obstacles, mark
them so that they do not come into contact with the cutting
accessories when using the machine.
Before starting:
▪ Carry out an inspection to ensure that the unit is properly
assembled and that safety issues and performance are
being addressed;
▪ Check if the spark plug cap (connector) is connected to
the spark plug;
▪ Check if the safety devices are in good conditions and
working properly. Never use the equipment if the safety
devices are missing, damaged or worn out;
▪ Check that the Shoulder harness strap and fastening
accessories are in good condition and properly
assembled;
▪ Replace damaged parts, as all other worn ones;
▪ After assembling the accessories and before using the
device, you must run a test in maximum speed at no load
for a certain time. Check for misalignments in the
moving parts or any other condition that may affect the
operation of the appliance. Check that all moving parts
rotate smoothly and without unusual noises;
▪ Perform all the necessary adjustments to the correct
assembly of the machine and if you have any questions
or problems, contact your VITO official dealer;
▪ Observe the local regulations on the hours when it is
allowed to use tools with a combustion engine and the
permitted noise level.
Keep third parties away from the operating area - at
least 15m away. Never work while animals or people,
particularly children, are at risk. During the operation
particles can be projected at a high speed that can cause
injuries.
Keep the safety distance from objects (vehicles and
glasses) to avoid property damage.
When working two or more people simultaneously in the
same area, safety distances must be maintained to prevent
accidents and injuries.
Work only in daylight or with good artificial lighting. Do not
use the appliance at night or when it is not possible to have
a clear view of the work area.
Never work with the appliance with adverse metrological
conditions such as dense fog, rain or strong wind, storms
or lightning. During operation, walk forward step by step
and observe the area of the blade or the nylon cutting-line
head.
While using the appliance, move to a stable position and
keep balance. Do not use the tool in slippery, irregular or
unstable surfaces, or in a lumpy terrain.
Keep yourself and clothing away from the cutting
accessories.
Always use personal protective clothing and equipment.
The use of face shields and goggles, dust masks, hearing
protection, anti-slip safety shoes, long-sleeved shirts,
gloves, helmets and knees guards, on the appropriate
conditions, reduces the risk of injury.
Publicité
