Samsung NV7B412 Serie Manuel D'installation Et D'utilisation page 343

Catalytic enamel surface (applicable models only)
The removable parts are coated with dark grey catalytic enamel. They can be
soiled with oil and fat spattered by the circulating air during convection heating.
However, these impurities burn off at oven temperatures of 200 °C or above.
1. Remove all accessories from the oven.
2. Clean the interior of the oven.
3. Select Convection mode with max temperature, and run the cycle for an hour.
Door
Do not remove the oven door unless for cleaning purposes. To remove the door for
cleaning, follow these instructions.
WARNING
The oven door is heavy.
NV7000B_NV7B41307AS_U1_DG68-01414A-01.indb 35 NV7000B_NV7B41307AS_U1_DG68-01414A-01.indb 35
1. Open the door and flip open the clips at
both hinges.
2. Close the door approximately 70°. Hold
the oven door by the sides using both
hands, and lift and pull upwards until the
hinges are removed.
3. Clean the door with soapy water and a
clean cloth.
Door glass
Depending on the model, the oven door is equipped with 3-4 sheets of glass
placed against each other. Do not remove the door glass unless for cleaning
purposes. To remove the door glass for cleaning, follow these instructions.
01
4. When done, follow steps 1 to 2 above in
the reverse order to reinstall the door.
Make sure the clips are hinged on both
sides.
1. Use a screwdriver to remove the screws
on the left and right sides.
2. Detach the coverings in the arrow
directions
3. Remove the first sheet from the door.
English 35
2022-02-16 2022-02-16 2:47:21 2:47:21