Télécharger Imprimer la page

Samsung NV7B412 Serie Manuel D'installation Et D'utilisation page 320

Masquer les pouces Voir aussi pour NV7B412 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Before you start
Basic use
For better cooking experience, familiarise yourself with how to use each accessory.
Wire rack
The wire rack is designed for grilling and roasting. Insert the
wire rack into position with the protruding parts (stoppers on
both sides) towards the front
Wire rack
The wire rack insert is used with the tray, and prevents liquid
insert *
from dropping onto the bottom of the oven.
Baking tray *
The baking tray (depth: 20 mm) is used to bake cakes, cookies,
and other pastries. Put the slanted side to the front.
Universal tray *
The universal tray (depth : 30 mm) is used for cooking and
roasting. Use the wire-tray insert to prevent liquid from
dropping onto the bottom of the oven.
Put the slanted side to the front.
Extra-deep
The extra-deep tray (depth: 50 mm) is used for roasting with
tray *
or without the wire-tray insert. Put the slanted side to the
front.
Meat probe *
The meat probe measures the internal temperature of the
meat to cook. Use only the meat probe that comes with your
oven.
Use the telescopic rail plate to insert the tray as follows:
Telescopic
rails *
1. Stretch the rail plate out from the oven.
2. Put the tray on the rail plate and slide the rail plate into the
oven.
3. Close the oven door.
Steam tray *
Use the steam tray only in Natural Steam mode. Put the tray
in the bottom center of the compartment and fill it with clean
water. As the tray becomes hot during or immediately after
cooking, be sure to use oven gloves or wait until the oven
cools down completely to remove the tray.
NOTE
Availability of accessories with an asterisk (*) depends on the oven model.
12 English
NV7000B_NV7B41307AS_U1_DG68-01414A-01.indb 12
NV7000B_NV7B41307AS_U1_DG68-01414A-01.indb 12
Mechanical lock (applicable models only)
Installation
A
Uninstallation
Lock/unlock
1. Insert the thin part (A) of the mechanical
lock into the corresponding slot of the
lock handle as shown.
2. Tighten the screw on the lock handle.
• Loosen and remove the screw from the
lock handle.
• To open the door, slightly lift up the lock
handle to unlock the door. Then, open the
door.
• To lock the door, simply close the door.
The mechanical lock automatically locks
the door.
2022-02-16
2022-02-16
2:47:16
2:47:16

Publicité

loading

Ce manuel est également adapté pour:

Nv7b411 serieNv7b413 serieNv7b414 serieNv7b415 serieNv7b411 c serieNv7b412 c serie ... Afficher tout