Samsung NV7B412 Serie Manuel D'installation Et D'utilisation page 327

Cooking with the meat probe (applicable models only)
The meat probe measures the internal temperature of meat while it's cooking.
When the temperature reaches the target temperature, the oven stops and finishes
cooking.
• Use only the meat probe that comes with your oven.
• You cannot set the cooking time if the meat probe is plugged in.
NV7000B_NV7B41307AS_U1_DG68-01414A-01.indb 19 NV7000B_NV7B41307AS_U1_DG68-01414A-01.indb 19
1. On the feature panel, press to choose a
cooking mode and temperature.
2. Insert the tip of the meat probe into the
centre of the meat to cook. Make sure the
rubber handle is not inserted.
3. Plug the probe connector into the socket
on the leftsided wall. Make sure you see
the Meat Probe inserted indicator when
the probe connector is connected.
4. Press button again and turn the value
dial (right-sided dial) to set the internal
temperature of the meat.
5. Press OK to start cooking. The oven
completes cooking with a melody when
the internal temperature of the meat
reaches the set temperature.
WARNING on acrylamide
• To prevent damage, do not use the meat probe with the spit accessory.
• When cooking is complete, the meat probe becomes very hot. To prevent burns,
use oven gloves to take out the food.
NOTE
Not all modes support using the meat probe. If you use the meat probe with
inapplicable modes, the current mode indicator blinks. When this happens, remove
the meat probe instantly.
English 19
2022-02-16 2022-02-16 2:47:18 2:47:18