Publicité
6
3. Open the door. Remove all the items
from the drum.
4. Put the front polystyrene packaging
element on the floor behind the
appliance. Carefully put down the
appliance onto its rear side.
5. Remove the polystyrene protection
from the bottom.
6. Remove the bottom cover from the
worktop. Using clips fix, that you find in
the user manual bag, attach the cover
1
2
to the bottom of the appliance.
7. Put the appliance back into an upright
position. Remove the power supply
cable and the drain hose from the
hose holder.
WARNING! It is possible to
see water flowing from the
drain hose. This is because
the washing machine has
been tested at the factory.
8. Remove the four transit bolts and pull
out the plastic spacers.
2
1
Publicité
