Publicité
20
Always obey the instructions
that you find on the packaging
of the detergent products.
1
Detergent compartment for pre‐
wash phase or soak programme
(if available). Add the detergent
for prewash and soak before the
start of the programme.
2
Detergent compartment for
washing phase. If you use a liq‐
uid detergent, put it immediately
before you start the programme.
Compartment for liquid additives
(fabric conditioner, starch). Put
the product in the compartment
before you start the programme.
After a washing cycle, if necessary,
remove any detergent residue from the
detergent dispenser.
Changing position of detergent
divider
1. Pull out the detergent dispenser. The
position A of the detergent divider is
for powder detergent (factory setting).
A
2
2. To use also liquid detergent/
additive or bleach: Remove
detergent divider from the position A
and insert it in position B.
MAX
1
B
2
The position B of the detergent divider
is for powder detergent in the rear
compartment and for liquid detergent/
additive or bleach in the front
compartment.
3. To use only liquid detergent: Insert
the detergent divider in position C.
C
2
• Do not use gelatinous or thick liquid
detergents.
• Do not exceed the maximum dose
of liquid detergent.
• Do not set the prewash phase.
• Do not set the delay start function.
4. Measure out the detergent and the
fabric conditioner and carefully close
the detergent dispenser.
MAX
1
MAX
1
Publicité
