Publicité
Les langues disponibles
Les langues disponibles
Operation
Starting up and temperature regulation
Insert the plug of the connection lead into
the plug socket with protective earth
c o n t a c t . W h e n t h e r e f r i g e r a t o r
compartment door is opened, the internal
lighting is switched on.
The temperature selector knob is located
on the top of the refrigerator compartment.
Setting 0 means:
Off.
Clockwise rotate the knob to turn on the
appliance
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
High temperature setting will accelerate
food waste.
For optimum food preservation, a medium
•
setting is generally the most suitable.
Important! High ambient temperatures (e.g.
on hot summer days) and a cold setting
(position 6 to 7) may cause the compressor
to run continuously or even non-stop!
Reason: when the ambient temperature is
high, the compressor must run continuously
to maintain the low temperature in the
appliance.
Then remove the controller box.
Remove and install the door shelf
Warning:The door shelf must not removed
and installed by the user! If the door shelf
is damaged ,contact the customer helpline
for assistance .To replace the door shelf,
the below steps can be followed:
Remove the door shelf
Press the right side of the door shelf
inwardly ,while holding the left side .
When the notch of the shelf has been
detached from the refrigerator door ,
remove the rack obliquely upwardly .
Install the door shelf
Firstly tilt the left side of the door
shelf ,and make sure the notch has
been fastened to the door .Then
press the right side inwardly ,push
it down to the right place.
10
Publicité
