Spark Screen Cleaning; Spark Plug Cleaning/Replacement - Nilfisk SWEEPER Manuel D'utilisation

ENGLISH

SPARK SCREEN CLEANING

1. Drive the machine on a level ground.
2. Engage the parking brake with the pedal (84) and the lever (76).
3. Turn the ignition key (69) to "0".
4. Remove the screws (48), then disengage the fasteners (49) to remove the left side bulkhead (47).
5. Remove the fastening screws, then remove the engine exhaust end pipe (53).
6. Clean the spark screen as shown in the Petrol Engine Manual.
7. Perform steps 4 and 5 in the reverse order.

SPARK PLUG CLEANING/REPLACEMENT

1. Drive the machine on a level ground.
2. Engage the parking brake with the pedal (84) and the lever (76).
3. Turn the ignition key (69) to "0".
4. Open the hood (23).
5. Remove the screws (45), then disengage the fasteners (46) to remove the engine guard (44).
6. Clean/replace the spark plug (51), as shown in the Petrol Engine Manual.
7. Perform steps 4 and 5 in the reverse order.
30
USER MANUAL
146 1064 000(3)2007-02 A SR 1300H P