Publicité
Les langues disponibles
Les langues disponibles
After the tonearm
adjustments
*1 Longitudinal
balance
adjustment
While
playing the record, the weight of the tonearm
is supported
by the arm
pivot and only tracking force is applied to the stylus tip.
To accomplish this, the
tonearm must first be balanced horizontally, with the tracking force indicator set
at "O".
*2 Tracking force
After the longitudinal balance adjustment, apply the recommended tracking force
weight so that the stylus tip will trace the music groove
accurately.
*3 Overhang
In record
playing, because
of the pivoted design of the tonearm, the stylus tip
can be perfectly tangent to the music groove at only one point of the record.
At all other portions of the record, there is a slight deviation
of the stylus from
tangency.
This is called the tracking error, and introduces
minute errors in the
amplitude and timing of the reproduced signal as compared
to the original, and
other forms of distortion which may be introduced depending on the cartridge
and stylus design.
Tracking error is minimized
by the selection of an optimum
"off-set" angle and
"overhang" distance.
Overhang
is the distance between
the stylus tip and the
center spindle.
This overhang adjustment
is made at the time
of installing a
particular cartridge, while the off-set angle is fixed by the manufacturer
of the
tonearm.
*4 Anti-skating compensation
While the record is being played, the frictional force between
the record groove
on both the stylus and the record.
CONNECTIONS
eCheck that the phono cord and
power
cord
are
not caught
under
any foot of the cabinet.
e@Leave a little slack in the connecting cord to allow for inad-
vertent
shock or vibration.
power cord
phono cord
to an ac outlet
to phono inputs
white... to L
PHONO
©
rear view of amplifier
to a ground
terminal
RECORD
PLAYING
AUTOMATIC
PLAYING
e@ Lower the amplifier volume
and set the input selector to PHO-
NO.
@Piace a record on the platter and set the Arm Rest as illustrated.
e@For 17cm
(7 inch) records, put the supplied
45-rpm
adaptor
over the center spindle.
record
Publicité
