Kuppersbusch FKG6800.0E Mode D'emploi page 11

2. PROPER USE OF REFRIGERATOR
2.1 PLACEMENT
•
Before use, remove all packing
materials, including bottom pads,
foam pads and tapes inside of
the refrigerator; tear off the
the refrigerator body.
•
Keep away from heat and avoid
direct sunlight. Do not place the
freezer in moist or wet places to
prevent rust or reduction of the
insulating effect.
•
Do not spray or wash the
refrigerator; do not put the
refrigerator in moist places easy
to be splashed with water so
as not to affect the electrical
insulation properties of the
refrigerator.
•
The space on top of the
refrigerator shall be greater than
10cm, and the refrigerator should
be placed against a wall with a
distance of more than 10cm to
facilitate heat dissipation.
Spare enough space for convenient
opening of the doors and drawers or
statement by the distributor.
10cm
10cm 10cm
W
125°
A
MDRB470
Width "w"
Depth "D"
Height "H"
A
B
The measurements in the above table
may differ, depending on the measuring
method.
NOTE:
This refrigerator needs to be installed
independently and cannot be used as a
built-in. Otherwise, it will cause problems
such as failure to install into the cabinet,
the performance and life of the product
are reduced. And the manufacturer does
not provide basic product warranty.
EN-11
10cm
10cm
H
D
10cm
B
MDRB521
595 595
660
660/678/700
1850 2010
1020 1020
1250
1250/1268/1280
(unit: mm)