FRIGOGLASS MAX-150 B Manuel D'utilisation page 15

ENG
4. Electronic controller*
4.1 Knowing your Danfoss ERC-112 Controller
For instructions of the functionality of Danfoss ERC-112 Controller and its related optional features,
please visit the following website link: http://www.frigoglass.com/manuals/.
4.2 For instructions of the functionality of Carel Controller and its related
optional features, please visit the following website link: http://www.frigoglass.com/manuals/.
4.3 Knowing your Sollatek JEA Controller
For instructions of the functionality of Sollatek JEA Controller and its related optional features, please
visit the following website link: http://www.frigoglass.com/manuals/.
5. Door blocking system*
In using the door blocking system, please follow the steps below
5.1 Application with hinged door ICMs
To block the Door at 90 degree:
Step 1: Open the door to an angle slightly greater than 90 degrees
Step 2: Remove the door blocker from bracket below the door (as shown in the picture)
Step 3: Rotate the door blocker towards the cabin and insert it in bracket located at front grid (as
shown in the picture)
To unblock the Door:
Step 1: Open the door slightly greater than 90 degrees and remove the door blocker manually from
bracket located at front grid
Step 2: Rotate the door blocker towards door and snap fit in bracket below the door (Initial position)
5.2 Application with sliding door ICMs
Step 1: Open the left door (same procedure also for right door)
Step 2: Lift up and rotate the door blocker towards the cabin (as shown in the picture)
15
Automatic removal of door blocker from bracket located at front grid is
for accidental purpose only.