Télécharger Imprimer la page

Ryobi RY401026 Manuel D'utilisation page 9

Masquer les pouces Voir aussi pour RY401026:

Publicité

Les langues disponibles

Les langues disponibles

APPLICATIONS
You may use this product for the purpose listed below:
 Mowing your lawn
WARNING:
Always remove battery packs and start key when moving
or transporting the mower to avoid accidental starting
that could result in serious personal injury.
INSTALLING/REMOVING BATTERY PACK
See Figure 9.
 Raise the battery cover.
 Align raised ribs on battery pack with grooves in the bat-
tery port and install the battery pack into the mower.
WARNING:
Make sure the latch on the bottom of the battery pack
snaps in place and the battery pack is fully seated and
secure in the mower's battery port before beginning
operation. Failure to securely seat the battery pack could
cause the battery pack to fall out, resulting in serious
personal injury.
 Lower the battery cover and make sure it is securely
closed.
To remove battery pack:
 Raise the battery cover.
 Press and hold the battery latch button at the bottom of
the battery pack.
 Remove battery pack from the mower.
 Lower the battery cover and make sure it is securely
closed.
For complete charging instructions, refer to the Operator's
Manuals for your RYOBI battery pack and charger models.
WARNING:
To avoid accidental starting that could result in serious
personal injury, always remove the start key when moving
or transporting the mower.
NOTE: The battery storage compartment offers a convenient
place for storing your battery, or to store an extra battery
pack. The unit cannot be powered by the battery while it
is installed in the battery storage compartment; it must be
moved to the battery port in order to power the unit from
the battery port.
OPERATION
STARTING/STOPPING THE MOWER
See Figures 10 - 11.
WARNING:
Keep children away – Keep all bystanders, children, and
pets at least 100 ft. away. Keep hands and feet away
from cutting area. Keep clear of the discharge opening
at all times.
 Raise the handle assembly as described earlier.
 Raise the battery cover.
 Install battery pack into the battery port.
 Insert the start key into the slot beside the battery storage
compartment.
 Lower the battery cover.
 Stand behind the handle assembly and pull the bail toward
the handle. Press and release the start button to start the
mower.
NOTE: The motor and blades will also start if the start button
is pressed first and the bail is engaged after.
 To stop the mower, release the bail.
SELF-PROPELLED MOWING
See Figure 11.
WARNING:
Never engage the blade when transporting the mower
from one location to another. Only engage the blade by
pressing the start button when you are ready to mow.
Failure to follow these instructions can result in serious
personal injury.
 Once the mower has been started, the self-propelled fea-
ture is engaged by pulling one or both of the self-propel
levers upward to meet the handle.
 To disengage the self-propelled feature, release the self-
propel levers.
NOTE: The self-propelled levers can be used without
engaging the blade to power the mower from one location
to another. You must pull the bail and then one or both
self-propel levers to move the mower without engaging
the blade.
9 — English

Publicité

loading