Operating Elements; Device Functions; Before Initial Use - DS Produkte YPF-6513 Mode D'emploi

EN

Operating Elements

15
14
13

Device Functions

• The device features electronic temperature control which reliably sets and main-
tains the chosen temperature while the iron is connected to the mains power.
• With the On / Off switch for steam the production of steam can be activated and
deactivated.
• The device switches off if it overheats.
• The anti-drip system prevents water from dripping out of the bottom of the iron at
low temperatures by switching off the steam generation function. NOTE: The anti-drip
system may cause a clicking noise during the heating-up or cooling-down process.
This is normal and does not indicate a defect.
• Thanks to the ceramic coating on the bottom of the iron, the device slides effort-
lessly over the fabric during ironing.
• The limescale fi lter of the device removes the limescale from the water in the water
reservoir. Caution: Limescale formation cannot be prevented entirely.
• The self-cleaning function removes limescale residues from the device.

Before Initial Use

ATTENTION!
■ Danger of suffocation from plastic fi lms and bags! Keep children and animals away
from the packaging material.
■ Water residues in the water reservoir are attributable to the fact that this device has
been tested and do not constitute a defect.
22
9 Spray nozzle
10 Water reservoir cap
11 On / Off switch for steam and self-clean-
9 ing: g
Steam off (right)
Steam on (middle)
10
Self-cleaning (left)
11
12 Steam burst button
13 Marking for temperature setting
14 Temperature control
12
15 Spray button
Not shown: Measuring cup